"to promote and support best and safe practices in the use and maintenance of Elevating Work Platforms"


<< First  < Prev   1   2   3   Next >  Last >> 
  • 24 Aug 2018 4:00 PM | Anonymous

    This EWPA Bulletin covers the minimum requirement of personnel who are required to carry out six-monthly inspections and issue certifications on MEWP’s. It is the stance of the EWPA Board that only CBIP qualified inspectors, and Manufacturers Employees who have been formally trained to the same or higher level of competency as CBIP Level 1 for inspection, can inspect and certify MEWP’s.   Downlaod full bulletin below.

    Six-Monthly Inspections - Minimum Standards.pdf

  • 20 Aug 2017 3:05 PM | Anonymous

    WorkSafe has received a number of enquiries about the acceptable standards of design, manufacture, testing and stability testing of new, and used machines imported into New Zealand after 22 October 2015.

    To clarify the requirements stated in section 4.1 of the Best Practice Guidelines, it is WorkSafe’s expectation that all imported:

    – new machines will comply to AS/NZS 1418.10 (current)
    – used machines will comply to AS 1418.10 (applicable to year of manufacture).

    Both standards above do not preclude the use of materials, designs, methods of assembly or procedures, and the like, that do not comply with the specific requirements of that standard, if they achieve equivalent or superior safety outcomes to those specified and as such these may also be utilised.

    – For example crush protection, not currently specified in the standard but specified in other international standards, could be fitted as an upgrade.

    Download Clarification Document 

  • 07 Dec 2016 4:22 PM | Anonymous

    Please note that the following draft is open for public comment:

    Draft Number:

    AS/NZS 1418.10:2011 Amd 1


    Cranes Hoists and Winches – Part 10 Mobile Elevating Work Platforms

    Project Committee:

    ME-005 Cranes

    Public Comment Closing Date:

    08/02/2017 23:59

    You can view the draft and any incoming comments here after entering your Standards Hub login details only if you are a member of standards. All comments are to be submitted on the Standards Hub. Follow the link above, login and select the “New Comment” button.

    If you are not a standards memberplease review the attached link and provide any feedback to me to be included in the Associations submission on members behalf. Close off for feedback to the EWPA is 20th January 2017.

    DR AS NZS 1418.10-2011 Amd 1-2016 Cranes hoists and winches - Mobile elevating work platforms.pdf

  • 10 Sep 2016 9:50 AM | Anonymous

    The committee meeting ME-005-10 for Australian Standard 1418.10 Cranes, hoists and winches Part 10: Mobile elevating work platforms, took place on 2-3 August in Brisbane. ME-005-10 has approved the Draft Amendment to be issued for public comment. The Draft will now be processed and submitted to ME-005 for approval to issue for Public Comment. It is expected to issue the Draft for public comment in October 2016 and the EWPA will update members when this takes place.

  • 18 Nov 2015 11:30 AM | Anonymous

    The EWPA are pleased to advise industry that the REVOCATION of the Approved Code of Practice for Power-Operated Elevating Work Platforms is now complete.

    The ACOP was superseded by the Best Practice Guidelines for Mobile Elevating Work Platforms in August 2014.

    It is important all of industry recognise this important change, and the existence of the Industry Best Practice Guidelines.  Please share this announcement when and where appropriate.

    A copy of the official notice of revocation can be viewed here.  

  • 28 Aug 2015 5:07 PM | Anonymous

    The Health and Safety Reform Bill passed its third reading at parliament yesterday. The Bill creates a new Health and Safety at Work Act, which will come into force on 4 April 2016.

    The Bill is the first significant reform of New Zealand’s health and safety laws in 20 years and addresses the recommendations of the Independent Taskforce on Workplace Health and Safety.

    The new law will be supported by regulations that are being developed in time for April 2016. 

    WorkSafe New Zealand will provide information to businesses and workers of the changes before the law comes into force.

    Until the Act comes into effect in April 2016, the current Health and Safety in Employment Act 1992 remains in force.

    Read the Government’s press release on the Beehive website

    For more information about the new law visit WorkSafe New Zealand’s website

  • 04 Sep 2014 4:47 PM | Anonymous

    The EWPA is very pleased to advise today's release of the Best Practice Guidelines for Mobile Elevating Work Platforms, by Worksafe NZ.  

    The Association would like to thank those members involved with the many reviews and meetings to achieve what is our new industry document that replaces the aCoP.

    A copy of the Guidelines can be found on our website under resources, or you may obtain a copy by clicking the link below.  Hard copies will be available at the AGM in Rotorua, and will be available via Worksafe in due course.


  • 24 Jun 2014 12:35 PM | Anonymous

    The EWPA have recently published a webpage that is designed to share information & provide advice and answers to commonly asked questions relating to the implementation and use of logbooks.  If you cannot find what you are looking for then please send your query to the Association at info@ewpa.org.nz

    Check the webpage out at - www.ewpa.org.nz/LogbookFAQ

  • 27 May 2014 9:07 AM | Anonymous

    Over recent years, the EWPA (Elevating Work Platform Association of New Zealand Inc.) has worked alongside various industry stakeholders including Worksafe NZ to develop a Best Practice Guide for the safe use and operation of EWP that will supersede the EWP Code of Practice 1997 (Blue book).

    Both documents reference various standards, in this case we refer to AS2550:10 that describes safe use of EWP's and provides guidance on maintenance of EWP's.

    The use of logbooks are recommended within this Best Practice Guide. The Best Practice Guide describes the use of logbooks as a means of providing information to assist operators with daily checks and a means of record keeping for routine maintenance checks and recording of faults.

    Logbooks are by no means the only way to record and provide this information,however they do simplify the process, are easy to use and will over time become the industry standard.

    This initiative will assist owners and operators with compliance to AS2550:10, and will provide educational and operational consistencies nationwide. Logbooks have been used in the Australian Access Industry since 1994.

    It is important to note:

    • §  The Best Practice Guide for the Safe Use of EWP’s has not yet been released, however, the EWPA expects this to happen within the next 3 months.

    • §  Logbooks and waterproof pouches are not yet available in New Zealand. Stocks arrive late June. Pre-orders can be made online via the EWPA, with expected delivery in July.

    The EWPA suggests that companies wishing to phase logbooks into their businesses, aim to do so within the next two months, so to coincide with the inevitable future release of the Best Practice.  

    AS2550:10 requires that all complete ‘Owner Routine Maintenance & Safety Check’ reports, all complete ‘Annual Inspection’ reports and all complete ‘Major Inspection’ reports are retained by management and made available for examination as required.

    The EWPA reminds owners & operators of the importance of the following:

    • §  Pre-hire check sheets should accompany EWP’s sent on hire.
    • §  Staff using EWP’s must be competent to operate a EWP.
    • §  Operators must have access to daily check sheets, and complete/ sign off daily checks.
    • §  Operators must have a sound understanding of EWP they operate.


  • 04 Nov 2013 4:47 PM | Anonymous
    In recent months there have been two incidents involving unintentional operation of upper control box joystick controllers on scissor lifts.

    In an attempt to prevent reoccurrence, End Users have been requesting that the Manufacturers Original Design be modified e.g. by fitting additional guarding.

    As a result, Owners are sometimes modifying their equipment to comply with such requests.

    The Association is concerned that such modifications have not been authorised by the equipment manufacturer; are sometimes of an ad-hoc nature and may not fully address the risk; and may introduce new hazards as a result. Click here for more info ..
<< First  < Prev   1   2   3   Next >  Last >> 
© Elevating Work Platform Association of NZ
Powered by Wild Apricot Membership Software